Plate amplifier Eiermann table frame
from 95,00 €
plus shipping
The top amplifier fits the Eiermann table frames in 135 cm width and is recommended for tops over 150 cm wide and less than 25 mm thick. The amplifier prevents the top from bending. It is simply slipped over the Eiermann frame.
Material and color  |
Painted steel, chrome-plated or stainless steel |
| Width | 145 cm |
| Height | 3 cm |
| Depth | 3 cm |
| Wall thickness | 1 mm |
Panel amplifier for Eiermann table frame
Thinner, larger tabletops can also be placed on the Eiermann table frame using the tabletop amplifier. The foam rubber pads included protect the table top.
Accessories for Eiermann
With our extensive range of accessories for the Eiermann table frame, you can tailor your table entirely to your needs.
- Height adjuster
- Record amplifier
- Cable ducts
- Swivel castors
Select material and color
Choose between different lacquers, the chrome-plated version or stainless steel. Only polyester-based powder coatings free of heavy metals are used for color finishing. These coatings are particularly UV-resistant and guarantee long-lasting color and surface quality. Only recyclable and toxicologically safe finishing processes are used for electroplating.
Select height
We recommend a lower edge of the table top of 72 cm. If you want to use the optional height adjusters or castors, you should choose the 66 cm height version. If you do not wish to use this accessory, select the height of 72 cm.
Select depth
The table top should protrude about 10 cm beyond the frame on each short side. The frame depth should therefore be about 20 cm less than the depth of your table top. This recommendation is mainly for visual reasons, but also for stability.
Select width
The tabletop should protrude about 25 cm to 35 cm beyond the frame on each long side. The frame width should therefore be 50 cm to 70 cm less than the table top. If you want to sit at the ends (e.g. at a dining table), the overhang should be 35 cm to 50 cm. In this case, the frame width should be 70 cm to 100 cm less.
Select cross position
The cross should be offset if you are only sitting at the table from one side (e.g. at a desk). If you want to sit at the table from both sides, the cross should be positioned in the middle.| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Material specification | Steel, black (lacquered), Steel, chrome, Steel, white (lacquered) |
| Height | 3 cm |
| Depth | 3 cm |
| Width |
