Profiles for connecting privacy screen and fence elements
The profiles enable the uncomplicated construction of individual and custom-made privacy screen and fence elements. Any plank or rhombus strip between 19 mm and 23 mm thick can be used as a fence infill between the posts. The cut edges are covered and protected. Only a narrow, 2.5 cm wide metal strip is visible on the front between the fence infill and the post.
Post connection profiles
| Application | Connection between privacy screen or fence element and post |
| Length | 180 cm |
| Front width | 2.5 cm |
| Rear width | 5 cm |
| Depth | 3.25 cm |
| Wall thickness | 2 mm |
| Possible plank thickness | 19 mm to 23 mm |
| material | Material: extruded aluminum EN AW-6060 T66 [EN755] |
| Surface finish | Surface: Silver anodized E6/EV1 |
Stabilization and cover profiles
| Use | For stabilizing the floorboards and covering the screw |
| Length | 180 cm |
| Width | 1.8 cm |
| Depth | 0.8 cm |
| Wall thickness | 1.5 mm |
| material | Material: extruded aluminum EN AW-6060 T66 [EN755] |
| Surface finish | Surface: Silver anodized E6/EV1 |
End profile
| Use | For the upper finish and protection from the weather |
| Length | 180 cm |
| Width | 3.3 cm |
| Depth | 2.5 cm |
| Wall thickness | 1.5 mm |
| material | Material: extruded aluminum EN AW-6060 T66 [EN755] |
| Surface finish | Surface: Silver anodized E6/EV1 |
Stainless steel screws
| Use 18mm screw | For fastening the boards and elements to the post profile |
| Use 28mm screw | For attaching the post profile to the post |
| Shank diameter | 2.8 mm |
| Drive unit | Torx 20 |
| material | Hardened stainless steel 1.4006 |
