Laying of teak solid wood parquet on prepared subfloor by craftswoman

CONSULTING ” PARQUET ” Subfloor

On which floor is a parquet floor made of solid wood planks laid?

The floor structure forms the basis for a durable and high-quality high-quality parquet. Depending on the situation and requirements, there are different approaches to achieving an optimum result.

Subfloor for parquet

The subfloor on which the parquet is to be laid must be level, stable, clean and dry. It should not be laid on carpet.

For floating installations, a combination of impact sound insulation and a vapor barrier between the floorboards and the subfloor is recommended. This insulates against sound on the one hand and prevents residual moisture from rising and affecting the parquet on the other. Small irregularities can also be evened out in this way.

Unterlagsmatte auf OSB-Platten als Vorbereitung für die Verlegung von Massivholzparkett
Teakholz-Massivholzparkett in Fischgrätmuster, belastbar auch bei hoher Beanspruchung

Impact sound with glued parquet

It is often assumed that with a fully glued solid wood parquet solid wood parquet no impact sound insulation is necessary. After all, there can be no rattling or movement in the parquet because there is no space between the parquet planks and the floor. However, this does not insulate the impact sound and every step on the parquet floor can usually be heard on the floor below.

Cork layer against sound

A good solution is the natural product cork. A thin layer of cork can be easily bonded to the subfloor – in addition to impact sound insulation, this also provides thermal insulation. For the room itself, this means that it is better soundproofed, there is no unpleasant hollow sound and the heat from the heating is not lost through the floor.

For safe walking on the parquet and optimum stability despite seasonal temperature fluctuations, we recommend solid wood parquet planks should always be laid fully glued down.

Korkunterlage als umweltfreundliche Basis für die Verlegung von Teakholz-Massivholzparkett
Verlegung von Teakholz-Massivholzparkett auf Fußbodenheizung mit sichtbarem Heizsystem

Suitable for underfloor heating

In general, parquet floors can be installed on hot water underfloor heating can be laid. The only requirement: the solid wood parquet floorboards should be fully glued and not laid floating.

Table of contents

Quality

Comparison of parquet types
Comparison of wood types
Buy online

Planning

Material requirements and offcuts
Calculate price
Comparison of parquet formats
Laying pattern
Laying direction
Installation height parquet
Underfloor heating

Relocation

Material list
Preparing the substrate
Laying and gluing

Care

Sanding
Oiling and waxing
Cleaning

Origin

Sustainability
CO₂ balance sheet

Our parquet

Teak parquet solid wood flooring

Paket mit 1,68 Quadratmetern

200,00